Formulary
PORE REFINING WIPES
FROM COGNIS GMBH
Pore Refining Wipes from Cognis
Cognis GmbH, Care Chemicals Division
Monheim, Germany
www.cognis.com
INGREDIENTS: WT.
Emulgade CM (Cognis) (Cetearyl isononanoate (and) 10.0
Ceteareth- 20 (and) cetearyl alcohol (and) glyceryl stearate
(and) glycerin (and) ceteareth 12 (and) cetyl palmitate)
Laricyl LS 8865 (Cognis) (Butylene glycol (and) Fomes 5.0
officinalis (mushroom) extract)
Elestab 388 (Laboratoires Serobiologiques)
Water, demin.
1.0
84.0
PROPERTIES: Add ingredients as listed and mix until homogeneous.
Anti-Aging Day Care Emulsion SPF 24
DSM Nutritional Products
(973) 257-8501 • www.nutraaccess.com
INGREDIENTS:
Phase A
Parsol 1789 (DSM) (Butyl methoxydibenzoylmethane
avobenzone; USAN)
Parsol SLX (DSM) (Polysilicone- 15)
Parsol 340 (DSM) (Octocrylene; USAN)
dl-alpha -Tocopheryl acetate (DSM) (Tocopheryl acetate)
Amphisol K (DSM) (Potassium cetyl phosphate)
Estol 3650 (Croda) (Glyceryl myristate)
Lanette 16 (Cognis) (Cetyl alcohol)
Butylated hydroxytoluene (Merck) (BH)
Dow Corning 200/100 cs (Dow Corning) (Dimethicone)
Phenonip (Clariant) (Phenoxyethanol & methylparaben &
& ethylparaben & butylparaben & propylparaben
& isobutylparaben)
Dub DIS (Stearinerie Dubois Fils) (Diisopropyl sebacate) 9.00
Cetiol B (Cognis) (Dibutyl adipate) 7.00
Antaron V-220 (ISP) (VP/Eicosene copolymer) 2.00
Phase B
Glycerin (Cognis)
Keltrol (CP Kelco) (Xanthan Gum)
Dequest 2046 (Solutia) (Pentasodium ethylenediamine
tetramethylenephosphonate)
D-Panthenol (DSM) (Panthenol) 1.00
Water dem. 46. 78
Phase C
WT.
3.00
0.99
2.70
0.50
3.00
4.00
2.00
0.05
2.00
0.80
3.00
0.30
Sodium hydroxide 10% sol.
Parsol HS (DSM) (Phenylbenzimidazole sulfonic acid
(Ensulizole; USAN)
Folic acid (DSM)
Stay-C 50 (DSM) (Sodium ascorbyl phosphate)
0.65
5.00
3.00
2.00
0.03
0.30
PROCEDURE: Heat phase A to 85°C and stir until homogeneous. Heat
phase B to 85°C and add to part A under agitation. Cool down the emulsion to 55°C and add phase C. When everything is homogenous add
phase D pre-heated to 50°C. Be sure that the pH of Parsol HS solution
is 7.0. If traces remain, add small quantities of the used neutralizing
base until the particles are dissolved. Homogenize thoroughly and then
with continued mixing cool down to ambient temperature. It is generally recommended to use vacuum while producing the emulsion.
PROPERTIES: pH— 7. 53; Viscosity—16800 cps (Brookfield, RV4, 10 rpm);
SPF in vivo— 24.2; In vitro UVAPF (Colipa 2007); PA: UVAPF/SPF ( 50
labelled); ≥0.33; PFA— 9. 3 Critical Wavelength: 374 nm. NOTES: For
U.S. (under new proposed final monograph), AP, EU, LA
Extra Protection Super Silky Sunscreen Lotion
Air Products & Chemicals Personal Care
(610) 481-6799 • www.airproducts.com/personalcare
INGREDIENTS:
Phase A
Isopropyl myristate
Finsolv TN (Innospec) (C12-15 alkyl benzoate)
Mineral oil USP
T-Lite SF (BASF) (Titanium dioxide (and) aluminum
hydroxide (and) dimethicone methicone copolymer)
W T.
2.5
3.0
3. 5
1.2
Product formulas are supplied by producers of raw materials. Included
in some instances are sources of supply for the raw materials and
instructions for preparation and use of the finished product. No guaran-
tee of performance or safety is implied by Happi. For more complete
details, readers should contact the suppliers directly using the tele-
phone number or website provided with each formula. If your company
has a formula that you think would be of interest to readers of Happi,
marketers of soaps and detergents; cosmetics and toiletries; fra-
grances; waxes and polishes; disinfectants and sanitizers and other
chemical specialties, we will be pleased to consider it for publication.
Address all material to: Formulary Editor, Happi, 70 Hilltop Rd.,