•Formulary
Water-Resistant Mascara
INGREDIENTS:
WT.
Phase A
Deionized water
47. 24
Veegum HV (R. T. Vanderbilt)
0.20
(Magnesium aluminum silicate)
Keltrol (Kelco Corp.) 0.20
(Xanthan gum)
Methylparaben (Ruger Chemical Co.) 0.25
Trisodium EDTA (Ruger Chemical Co.) 0.01
Phase B
Lipo PE Base G- 55 (Lipo Chemicals) 12.00
(Glycerin (and) polyester- 5)
Phase C
Rose Talc (Presperse) 3.00
(Talc)
Iron Oxide Black (Sun Chemical) 9.00
Phase D
Triethanolamine, 99% (Ruger Chemical Co.) 1.50
Phase E
Lipobee 102 (Lipo Chemicals) 10.00
(Synthetic beeswax)
Carnuba wax (Hansotech) 4. 50
Panalane H-300E (Lipo (Ineos)) 5. 50
(Hydrogenated polyisobutene)
Lipo Stearic Acid (Lipo Chemicals) 3.00
Liposorb SQO (Lipo Chemicals) 1.30
(Sorbitan sesquioleate)
Propylparaben (Ruger Chemical Co.) 0.20
Liponate NEB (Lipo Chemicals) 1.00
(C12-15 alkyl benzoate)
Phase F
Deionized water 1.00
Liposerve IU (Lipo Chemicals) 0.10
PROCEDURE:
In main kettle, combine phase A ingredients
and heat to 70°C. Mill phase A in a colloid mill.
Add phases B and C and continue milling until
pigment is dispersed uniformly. Add phase D.
In a separate kettle, combine phase E ingredients and heat to 80-84°C. Heat combined phases A, B, C and D (water phase) pigment grind
to 80-84°C and mix slowly to deaerate the
batch. Add combined phase E to batch under
slow sweep and emulsify the batch. Cool to
35°C, and add premixed phase F. Pour the
batch at 30°C into a suitable container.
MORE INFO:
Lipo Chemicals, Inc., 207 Nineteeth Ave., Paterson, NJ
(973) 345-8600, Fax (973) 345-8365, Website: www.lipochemicals.com
Cold Process Sheer Foundation (Light Beige)
INGREDIENTS:
Phase A
DI H2O 78. 88
Titanium dioxide (Sensient) 2.20
Yellow iron oxide LC 181 (Sensient) 0.20
Brown iron oxide C33-115 (Sun Chemical) 0.10
Phase B
Hydresia G2 (Botaneco) 12.00
(Carthamus tinctorius (Safflower)
oleosomes (and) glycerin (and) water)
Fragrance q.s.
Phase C
Natrulon H- 10 (Lonza) 5.00
(Polyglycerin- 10)
Phase D
Aristoflex AVC (Clariant) 1.10
(Ammonium acryloyldimethyltaurate/
VP copolymer)
Phase E
Preservative q.s.
Phase F
Sodium hydroxide
WT.
PROCEDURE:
Mix phase A under high sheer (homogenizer
recommended) until dispersed. Using a propeller blade, mix phase B on low speed (300
rpm) for 5 minutes. Add phase C to phase A and
mix for additional 1 minute. Slowly add phase
A to phase B and increase blade speed to 800
rpm to emulsify. Mix for 8-10 minutes. Slowly
add phase D (thickener) to batch and mix 800
rpm until smooth (approx. 8-10 minutes). Add
preservative and mix 300 rpm for 1 minute.
Adjust PH to 6. 5 using NaOH.
DESCRIPTION:
This cold process, sheer foundation is quick
and easy to produce. The results: a natural,
transparent and airbrushed look to the skin for
those who want the look of a mineral powder
foundation, but without the dryness.
q.s.
MORE INFO:
Botaneco Inc., 3430 Progress Drive, Suite B, Bensalem, PA 19020
(215) 604-0634, Website: www.botaneco.ca